Canada Farm Show 2005
We recently attended the Canada Farm Show along with our agents T.S.
FABRICATION from Walton, Ontario. We had on display a 28 tonne
bogie complete with 140mm square, rigid and steering axles. Recently we have
supplied through T.S.
FABRICATION, bogies and axles for sprayers and slurry tankers for
the Canadian Market. We see this market developing over the next few years, as
the market for faster tractors increases, the demand for braked axles will
follow, enabling safer operation of equipment.
LAMMA '06 - Wednesday 18th January - Thursday 19th January
2006, held at Newark Show Ground, Nottinghamshire.
.bmp)
LAMMA '07 is on the 17th & 18th
January 2007 @ Newark Show Ground, Nottinghamshire. Please visit our stand, as your support would be greatly appreciated. We will be showcasing some of the latest developements in the industry, including the Black Bull from ADR. This features:
EWP (Ecological Water Painting)
An environmentally-friendly method of treatment
Over 50% reduction in axle beam weight, allowing for more carrying cappacity and more resistance in extreme conditions
"Twin Steam" Welding System.
Not a tube, but a new concept hollow profile in special high-tensile limit steel, with automatic bilateral welding: external and internal
Improved Adaptability Hydraulic Suspension
The best solution for off road use
The Black Bull's big, hollow section gives consistent behaviour over all terrains
Optimal Geometry of Consistent Profile Tubular Section
The consistent thickness of the walls and curvature of the corners are optimally proportioned to ensure uniform resistance with both dynamic and torsional loads
Equal Radius on Corners with Narrow Coupling
This results in perfect coupling to suspension attachments, and economics of scale for components with optimization of assembly times
Perfectly Rectilineal Axel Beam
A complete compensation of internal tensions
Absolutely No Alteration to Axle Beam Geometry
Prevents problems with mounting on suspension and axial and cross deformation
Perfect Axialality between Spindles and Axle Beam
Thanks to precision machining to prepare the point of coupling with the spindle
Exclusive System for welding Spindle and Axle Beams
Developed by ADR in assosiation with leading steelworks and welding experts
Spindles Pressed in High Resistance Steel for Improved Strength
Exclusive Method for Machining Spindles
With axial tolerances equal to zero
Canadian International Farm Equipment Show 2007
In 2007, we shall be returning to the Canadian International Farm Equipment Show that we attended in 2005. We predict a level of success from this visit similar to that which we experienced from the last. Any support would be greatly appreciated.
